Description
Replacement blades for flooring hand tools
Identify the original tool and blade before choosing a replacement set. Blade shape, mounting and supplied pack quantity must match the intended tool; similar product names do not establish interchangeability.
| What matters on site | Practical value |
|---|---|
| Identify the cutting profile | Compare the original blade shape and mounting with the replacement. |
| Check the pack quantity | The product identifies a ten-piece pack; confirm the selected material and configuration. |
| Replace safely | Follow the hand tool’s instructions and check fastening before making a trial cut. |
Identify the cutting profile
Compare the original blade shape and mounting with the replacement.
Check the pack quantity
The product identifies a ten-piece pack; confirm the selected material and configuration.
Replace safely
Follow the hand tool’s instructions and check fastening before making a trial cut.
Key specifications and configuration
| Objet | Spécifications |
|---|---|
| Blade length (mm) | 60 |
| Blade width (mm) | 21 |
| Blade-body thickness (mm) | 0.5 / 0.7 |
| Pieces per pack | 10 |
| Net weight (kg) | 0.08 |
Blade length (mm):
60
Blade width (mm):
21
Blade-body thickness (mm):
0.5 / 0.7
Pieces per pack:
10
Net weight (kg):
0.08
Selection and use
| Step | What to check |
|---|---|
| Identify the tool | Provide photographs of the tool, blade and mounting. |
| Check the replacement | Compare shape, dimensions and the ordered pack. |
| Fit and inspect | Fit the correct blade and assess a controlled trial cut or groove. |
Identify the tool:
Provide photographs of the tool, blade and mounting.
Check the replacement:
Compare shape, dimensions and the ordered pack.
Fit and inspect:
Fit the correct blade and assess a controlled trial cut or groove.
Frequently asked questions
Does a ten-piece pack guarantee fit with every groover?
No. Confirm the blade shape and mounting for the actual tool.
How should I order spares?
Provide the existing blade, tool photographs, mounting dimensions and required pack quantity.
Should the blade be tested after replacement?
Yes. Check fastening and verify the resulting cut or groove on representative material.
