Description
Select the guide arrangement and blade for the flooring and joint preparation method.
Guide-wheel grooving before seam welding
Compare the wheeled groover’s footprint, grip and tracking layout for the seam and available clearance. Wheel guidance assists positioning; the fitted blade and the flooring system determine the groove that must be produced.
| What matters on site | Practical value |
|---|---|
| Compare clearance and grip | Overall size and handle height affect access and the operator’s working position. |
| Match the groove profile | Confirm the correct blade, projection and required groove shape for the seam. |
| Check tracking on the floor | Trial the tool on representative material before establishing the working method. |
Compare clearance and grip
Overall size and handle height affect access and the operator’s working position.
Match the groove profile
Confirm the correct blade, projection and required groove shape for the seam.
Check tracking on the floor
Trial the tool on representative material before establishing the working method.
Key specifications and configuration
| Item | Specification |
|---|---|
| Listed overall dimensions (l × w × h, mm) | 155 × 40 × 72 |
| Net weight (kg) | 0.3 |
Listed overall dimensions (l × w × h, mm):
155 × 40 × 72
Net weight (kg):
0.3
Compare the options
Guide-wheel groover dimensions and handling
| Configuration | Dimensions and construction |
|---|---|
| 1.0 wheeled model | Product Structure: Top grip, wheel support, and manual cutting edge. Overall length × width × height: 205 × 83 × 90 mm. Net Weight: 1.2 kg. |
| 2.0 wheeled model | Product Structure: Smaller, narrower wheeled model with top grip. Overall length × width × height: 155 × 40 × 72 mm. Net Weight: 0.3kg; 0.9kg less than 1.0. |
| Wooden-handle wheeled model | Product Structure: Top wooden handle and wheel support. Overall length × width × height: 160 × 55 × 110 mm. Net Weight: 0.6kg; 0.3kg more than 2.0. |
| Configuration | Application and value | Selection checks |
|---|---|---|
| 1.0 wheeled model | Local and continuous manual seams where clearance permits. Larger grip layout offering a different size option. Actual grip suits the user, who can accommodate the larger tool. | Larger and heavier; no proven deeper-grooving capability. |
| 2.0 wheeled model | Trial access in restricted areas, moving between locations, and personal tool kits. Lower carrying load, with a narrower and lower body. Low overall size is needed and trial grooves pass in the same material. | Small size does not guarantee wall access; validate cutting edge and control. |
| Wooden-handle wheeled model | Manual grooving where a wooden handle is preferred and the wheel frame fits. Wooden-handle feel and a different height layout. Wooden-handle grip fits, and actual support and grooves meet requirements. | Heavier and taller than 2.0; a wooden handle does not guarantee comfort or cleaning resistance. |
1.0 wheeled model
Dimensions and construction:
Product Structure: Top grip, wheel support, and manual cutting edge.
Overall length × width × height: 205 × 83 × 90 mm.
Net Weight: 1.2 kg.
Application and value:
Local and continuous manual seams where clearance permits. Larger grip layout offering a different size option. Actual grip suits the user, who can accommodate the larger tool.
Selection checks:
Larger and heavier; no proven deeper-grooving capability.
2.0 wheeled model
Dimensions and construction:
Product Structure: Smaller, narrower wheeled model with top grip.
Overall length × width × height: 155 × 40 × 72 mm.
Net Weight: 0.3kg; 0.9kg less than 1.0.
Application and value:
Trial access in restricted areas, moving between locations, and personal tool kits. Lower carrying load, with a narrower and lower body. Low overall size is needed and trial grooves pass in the same material.
Selection checks:
Small size does not guarantee wall access; validate cutting edge and control.
Wooden-handle wheeled model
Dimensions and construction:
Product Structure: Top wooden handle and wheel support.
Overall length × width × height: 160 × 55 × 110 mm.
Net Weight: 0.6kg; 0.3kg more than 2.0.
Application and value:
Manual grooving where a wooden handle is preferred and the wheel frame fits. Wooden-handle feel and a different height layout. Wooden-handle grip fits, and actual support and grooves meet requirements.
Selection checks:
Heavier and taller than 2.0; a wooden handle does not guarantee comfort or cleaning resistance.
Manual grooving layouts and working positions
Manual grooving layouts and working positions
| Configuration | Dimensions and construction |
|---|---|
| 1.0 wheeled model | Product layout: Top grip and wheel frame. Net Weight: 1.2 kg. Dimensions: 205 × 83 × 90 mm. Known blade information: Blade type and groove width/depth need verification. |
| 2.0 wheeled model | Product layout: Narrow body with wheel frame. Net Weight: 0.3 kg. Dimensions: 155 × 40 × 72 mm. Known blade information: Blade type and groove width/depth need verification. |
| Wooden-handle wheeled model | Product layout: Top wooden handle and wheel frame. Net Weight: 0.6 kg. Dimensions: 160 × 55 × 110 mm. Known blade information: Blade type and groove width/depth need verification. |
| Wooden straight handle | Product layout: Straight shaft with cutting head at the end. Net Weight: 0.6 kg. Dimensions: Length 220mm, handle diameter 27mm. Known blade information: Overall blade shape 19×12mm; not groove dimensions. |
| Plastic straight handle | Product layout: Straight shaft with plastic grip. Net Weight: 0.6 kg. Dimensions: Same as the wooden straight-handle model. Known blade information: Same as left; verify compatibility separately. |
| Configuration | Application and value | Selection checks |
|---|---|---|
| 1.0 wheeled model | Manual seams with sufficient clearance. Larger tool grip option. | Heavier and wider; does not establish deeper grooving. |
| 2.0 wheeled model | Trial access in restricted areas and movement between locations. Lightest and narrowest of the three wheeled models. | Small size does not guarantee zero wall clearance. |
| Wooden-handle wheeled model | Preferred wooden-handle wheeled control. Wooden handle combined with a wheeled structure. | Taller and heavier than 2.0. |
| Wooden straight handle | Trial grooves in local positions inaccessible to a wheel frame. Evaluate straight-handle cutting-head access separately. | No wheel-frame support; does not guarantee access to every corner. |
| Plastic straight handle | Local positions with a preference for a plastic handle. Alternative handle material with shared specifications. | No lightweight advantage; cleaning resistance needs verification. |
1.0 wheeled model
Dimensions and construction:
Product layout: Top grip and wheel frame.
Net Weight: 1.2 kg.
Dimensions: 205 × 83 × 90 mm.
Known blade information: Blade type and groove width/depth need verification.
Application and value:
Manual seams with sufficient clearance. Larger tool grip option.
Selection checks:
Heavier and wider; does not establish deeper grooving.
2.0 wheeled model
Dimensions and construction:
Product layout: Narrow body with wheel frame.
Net Weight: 0.3 kg.
Dimensions: 155 × 40 × 72 mm.
Known blade information: Blade type and groove width/depth need verification.
Application and value:
Trial access in restricted areas and movement between locations. Lightest and narrowest of the three wheeled models.
Selection checks:
Small size does not guarantee zero wall clearance.
Wooden-handle wheeled model
Dimensions and construction:
Product layout: Top wooden handle and wheel frame.
Net Weight: 0.6 kg.
Dimensions: 160 × 55 × 110 mm.
Known blade information: Blade type and groove width/depth need verification.
Application and value:
Preferred wooden-handle wheeled control. Wooden handle combined with a wheeled structure.
Selection checks:
Taller and heavier than 2.0.
Wooden straight handle
Dimensions and construction:
Product layout: Straight shaft with cutting head at the end.
Net Weight: 0.6 kg.
Dimensions: Length 220mm, handle diameter 27mm.
Known blade information: Overall blade shape 19×12mm; not groove dimensions.
Application and value:
Trial grooves in local positions inaccessible to a wheel frame. Evaluate straight-handle cutting-head access separately.
Selection checks:
No wheel-frame support; does not guarantee access to every corner.
Plastic straight handle
Dimensions and construction:
Product layout: Straight shaft with plastic grip.
Net Weight: 0.6 kg.
Dimensions: Same as the wooden straight-handle model.
Known blade information: Same as left; verify compatibility separately.
Application and value:
Local positions with a preference for a plastic handle. Alternative handle material with shared specifications.
Selection checks:
No lightweight advantage; cleaning resistance needs verification.
Selection and use
| Step | What to check |
|---|---|
| Mark and inspect the seam | Check the flooring system’s required groove and protect the adjacent surface. |
| Check blade and guidance | Inspect blade condition, fastening and free wheel movement. |
| Trial the groove | Check tracking, profile and depth on an offcut or test seam before continuing. |
Mark and inspect the seam:
Check the flooring system’s required groove and protect the adjacent surface.
Check blade and guidance:
Inspect blade condition, fastening and free wheel movement.
Trial the groove:
Check tracking, profile and depth on an offcut or test seam before continuing.
Logo customization
The image shows the identified customization area for this product. Send the artwork and required quantity so the placement, marking method and final proof can be confirmed before production.
Frequently asked questions
Is it easier to control than 1.0?
Do not assume so. Smaller size changes carrying and grip; validate tracking control in the same flooring.
Is 6.4kg/20 the individual gross weight?
It is an average including allocated outer-carton weight and does not confirm individual bag/box packaged weight.
Are blades interchangeable with other brands' small groovers?
Similar appearance does not establish this. Check mounting, cutting edge, and part number.
