Description
Replacement trimming heads by actual geometry
Choose the T-, O- or V-type replacement head by the tool connection and the required contact at the weld. The letter identifies the configuration and does not establish compatibility with every trimming tool.
| What matters on site | Practical value |
|---|---|
| Compare the original head | Check the head outline, mounting and working edge. |
| Check corner access | Confirm that the complete tool can reach the joint without marking adjacent flooring. |
| Order the correct component | The replacement head is separate from a complete handle assembly unless specifically included. |
Compare the original head
Check the head outline, mounting and working edge.
Check corner access
Confirm that the complete tool can reach the joint without marking adjacent flooring.
Order the correct component
The replacement head is separate from a complete handle assembly unless specifically included.
Key specifications and configuration
| Item | Specification |
|---|---|
| Approximate overall dimensions (l × w × h, mm) | 7.1 × 27.9 × 6.1 |
| Net weight (kg) | 0.008 |
Approximate overall dimensions (l × w × h, mm):
7.1 × 27.9 × 6.1
Net weight (kg):
0.008
Selection and use
| Step | What to check |
|---|---|
| Identify the original head | Provide a view of the head and the fixing arrangement. |
| Confirm the replacement | Compare actual geometry and mounting. |
| Fit and trial | Check fastening and assess a trial trim on a matching joint. |
Identify the original head:
Provide a view of the head and the fixing arrangement.
Confirm the replacement:
Compare actual geometry and mounting.
Fit and trial:
Check fastening and assess a trial trim on a matching joint.
Frequently asked questions
Does the head letter establish universal compatibility?
No. Check the mounting and full cutting geometry against the actual tool.
Is the complete handle included?
This listing identifies a replacement head. Confirm any additional components in the quotation.
How should I check the selected head?
Fit the correct component and test access and finish on a representative joint.
