Beschreibung
A steel reference for flooring layout
Use the flooring ruler as a reference for measuring, marking and guided layout checks. Keep the working edge and scale visible, and confirm the selected ruler’s dimensions before specifying a tool set.
| What matters on site | Practical value |
|---|---|
| Transfer measurements | Use a consistent starting reference when marking repeated positions. |
| Check edge contact | Make sure the ruler sits securely on the working surface. |
| Inspect before use | Check the scale and straight edge for damage or contamination. |
Transfer measurements
Use a consistent starting reference when marking repeated positions.
Check edge contact
Make sure the ruler sits securely on the working surface.
Inspect before use
Check the scale and straight edge for damage or contamination.
Key specifications and configuration
| Artikel | Spezifikation |
|---|---|
| Material | Steel |
Material:
Steel
Selection and use
| Step | What to check |
|---|---|
| Clean the reference | Remove debris from the ruler and material. |
| Align and mark | Keep the ruler stable and verify the intended measurement. |
| Recheck before cutting | Confirm the marked line and the cutting tool clearance. |
Clean the reference:
Remove debris from the ruler and material.
Align and mark:
Keep the ruler stable and verify the intended measurement.
Recheck before cutting:
Confirm the marked line and the cutting tool clearance.
Logo customization
The image shows the identified customization area for this product. Send the artwork and required quantity so the placement, marking method and final proof can be confirmed before production.
Frequently asked questions
Is It a 2050mm Stainless-Steel Straightedge?
The older website says so, but the product specifications states only steel without dimensions. Measure and confirm material; do not treat this as an established supply specification.
Does It Have Graduations?
Current records are insufficient; inspect the physical graduations, units, and measurement datum.
Will Coiling Leave It Undeformed?
The photograph shows only the current coiled appearance. Validate permitted bending methods, springback, and service life.
Does It Guarantee Cut Accuracy?
Straight edge, securing, knife, and material all affect the cut line. No accuracy tolerance or complete validation data is currently available.
