Beschreibung
Handheld hot-air welding
Use the handheld gun with the correct nozzle, welding material and controlled hand feed. Select the gun by its own electrical and temperature specifications; do not transfer one model’s supply or power rating to another.
| What matters on site | Practical value |
|---|---|
| Match gun and nozzle | Confirm nozzle fit and the working geometry for the material and joint. |
| Control the weld by trial | Heat, airflow, feed and pressure need to suit the named material and welding rod. |
| Confirm what is supplied | Gun, case, nozzle and accessories are separate configuration items unless included in the quotation. |
Match gun and nozzle
Confirm nozzle fit and the working geometry for the material and joint.
Control the weld by trial
Heat, airflow, feed and pressure need to suit the named material and welding rod.
Confirm what is supplied
Gun, case, nozzle and accessories are separate configuration items unless included in the quotation.
Key specifications and configuration
| Artikel | Spezifikation |
|---|---|
| Listed product length (mm) | 300 |
| Rated supply (V) | 220 |
| Rated power (W) | 1600 |
| Temperature setting range (°C) | 20–620 |
| Net weight (kg) | 0.9 |
| Handle diameter (mm) | 48 |
Listed product length (mm):
300
Rated supply (V):
220
Rated power (W):
1600
Temperature setting range (°C):
20–620
Net weight (kg):
0.9
Handle diameter (mm):
48
Compare the options
Small Hot-Air Welding Gun and Black-Case Model
| Konfiguration | Dimensions and construction |
|---|---|
| Small hot-air welding gun | Electrical identity: Local record: 220V, 1600W. Temperature and airflow: 20–620℃; airflow unconfirmed. Dimensions and grip: Gun length 300mm, maximum outside diameter 70mm; handle diameter 48mm. Weight definition: Gun-only net 0.9kg; carton gross 0.98kg. |
| Plastic welding gun in black case | Electrical identity: Voltage blank; power unconfirmed. Temperature and airflow: 20–700℃; 260L/min is a single value; adjustment and test scope need verification. Dimensions and grip: Gun dimensions and handle diameter unrecorded. Weight definition: Recorded net 3kg; inclusion of case and accessories unspecified. |
| Konfiguration | Application and value | Selection checks |
|---|---|---|
| Small hot-air welding gun | Manual trial welding for short seams, repairs, and complex transitions. Local electrical and gun data are clearer; check gun-only and with-nozzle clearance. | Personnel control feed; airflow, interface, and supplied nozzles still need verification. |
| Plastic welding gun in black case | Assess the same manual process; focus on case carrying and kit delivery. Black case consolidates confirmed tools/accessories for kit management. | Many identity gaps; a case photo does not establish a complete installation kit. |
Small hot-air welding gun
Dimensions and construction:
Electrical identity: Local record: 220V, 1600W.
Temperature and airflow: 20–620℃; airflow unconfirmed.
Dimensions and grip: Gun length 300mm, maximum outside diameter 70mm; handle diameter 48mm.
Weight definition: Gun-only net 0.9kg; carton gross 0.98kg.
Application and value:
Manual trial welding for short seams, repairs, and complex transitions. Local electrical and gun data are clearer; check gun-only and with-nozzle clearance.
Selection checks:
Personnel control feed; airflow, interface, and supplied nozzles still need verification.
Plastic welding gun in black case
Dimensions and construction:
Electrical identity: Voltage blank; power unconfirmed.
Temperature and airflow: 20–700℃; 260L/min is a single value; adjustment and test scope need verification.
Dimensions and grip: Gun dimensions and handle diameter unrecorded.
Weight definition: Recorded net 3kg; inclusion of case and accessories unspecified.
Application and value:
Assess the same manual process; focus on case carrying and kit delivery. Black case consolidates confirmed tools/accessories for kit management.
Selection checks:
Many identity gaps; a case photo does not establish a complete installation kit.
Automatic Traveling and Handheld Hot-Air Welding
Automatic Traveling and Handheld Hot-Air Welding
| Konfiguration | Dimensions and construction |
|---|---|
| automatic traveling automatic traveling machine | Known electrical data: Input 220V, main unit 10W; gun heating power unconfirmed. Weight scope: Nameplate 8.5kg; whether gun/reel are included needs verification. |
| Small hot-air welding gun | Known electrical data: 220 V, 1600 W. Weight scope: Gun-only net weight 0.9kg. |
| Plastic welding gun in black case | Known electrical data: Voltage and power need confirmation. Weight scope: Recorded 3kg; whether case/accessories are included needs verification. |
| Konfiguration | Application and value | Selection checks |
|---|---|---|
| automatic traveling automatic traveling machine | Chassis travels automatically; personnel monitor guidance and rod feed. Trial welds on accessible continuous straight PVC seams. Allow complete-machine tracking and start/stop clearance; reel and cable must not interfere. Organizes continuous feed and rod payout within the machine. | Frequent positioning on short seams or restricted transitions requires manual assistance; speed information is missing. Complete-kit nameplates, gun, nozzle, reel, and start/stop trial welds. |
| Small hot-air welding gun | Personnel control gun movement, hot-air contact, and weld rod. Trial welds on short seams, repairs, corners, and transitions. Allow hand clearance with nozzle installed; operating consistency depends more on personnel. Flexible gun orientation; gun-only information is clearer. | Personnel move the gun continuously on long runs; fixed meters-per-minute or constant temperature cannot be guaranteed. This gun's nameplate, clearance with nozzle, interface, and same-material trial welds. |
| Plastic welding gun in black case | Same handheld principle; verify actual gun configuration first. Assess manual welding tasks and configurations of a kit carried in a case. Check case contents, cooldown before storage, and single-gun grip. Consolidates confirmed accessories for convenient kit delivery. | Model and ratings have gaps; a black case alone cannot establish performance. Complete identity and contents first, then weigh components separately and trial weld. |
automatic traveling automatic traveling machine
Dimensions and construction:
Known electrical data: Input 220V, main unit 10W; gun heating power unconfirmed.
Weight scope: Nameplate 8.5kg; whether gun/reel are included needs verification.
Application and value:
Chassis travels automatically; personnel monitor guidance and rod feed. Trial welds on accessible continuous straight PVC seams. Allow complete-machine tracking and start/stop clearance; reel and cable must not interfere. Organizes continuous feed and rod payout within the machine.
Selection checks:
Frequent positioning on short seams or restricted transitions requires manual assistance; speed information is missing. Complete-kit nameplates, gun, nozzle, reel, and start/stop trial welds.
Small hot-air welding gun
Dimensions and construction:
Known electrical data: 220 V, 1600 W.
Weight scope: Gun-only net weight 0.9kg.
Application and value:
Personnel control gun movement, hot-air contact, and weld rod. Trial welds on short seams, repairs, corners, and transitions. Allow hand clearance with nozzle installed; operating consistency depends more on personnel. Flexible gun orientation; gun-only information is clearer.
Selection checks:
Personnel move the gun continuously on long runs; fixed meters-per-minute or constant temperature cannot be guaranteed. This gun's nameplate, clearance with nozzle, interface, and same-material trial welds.
Plastic welding gun in black case
Dimensions and construction:
Known electrical data: Voltage and power need confirmation.
Weight scope: Recorded 3kg; whether case/accessories are included needs verification.
Application and value:
Same handheld principle; verify actual gun configuration first. Assess manual welding tasks and configurations of a kit carried in a case. Check case contents, cooldown before storage, and single-gun grip. Consolidates confirmed accessories for convenient kit delivery.
Selection checks:
Model and ratings have gaps; a black case alone cannot establish performance. Complete identity and contents first, then weigh components separately and trial weld.
Selection and use
| Step | What to check |
|---|---|
| Check the electrical identity | Confirm the nameplate, supply, nozzle and selected accessories. |
| Establish the settings | Use representative material to set heat and feed without overheating the surrounding surface. |
| Cool and finish | Follow the supplied shutdown and cooling instructions before storage. |
Check the electrical identity:
Confirm the nameplate, supply, nozzle and selected accessories.
Establish the settings:
Use representative material to set heat and feed without overheating the surrounding surface.
Cool and finish:
Follow the supplied shutdown and cooling instructions before storage.
Logo customization
The image shows the identified customization area for this product. Send the artwork and required quantity so the placement, marking method and final proof can be confirmed before production.
Frequently asked questions
Does 1600W mean more accurate temperature?
Power is a rated input record and does not establish temperature accuracy, closed-loop control, or weld quality.
Can 20–620℃ be used directly as flooring welding temperatures?
It is not a universal setting. Trial weld according to material and rod instructions; confirm measurement location and actual air temperature separately.
Does 300mm include the nozzle?
No. The table expressly lists gun length; 380mm is the configuration with a nozzle.
Are a speed-welding nozzle and heating element included?
Existing photos and specifications do not confirm standard quantities. List them in the supply contents.
Can it mount on any 220V chassis?
No. Voltage alone does not establish mechanical mounting, hot-air system, or control compatibility.
