Description
Tape application matched to the marking task
Choose the applicator for the tape and layout required on site. Curved-line guidance, double-sided seam-tape application and push-type marking are separate tasks; compare the tape path, clearance and substrate.
| What matters on site | Practical value |
|---|---|
| Match the tape system | Confirm tape width, core and adhesive type for the selected applicator. |
| Check the layout | Compare straight runs, curves and end clearances before starting. |
| Trial adhesion and removal | Test tape contact and removal on the actual substrate before a larger application. |
Match the tape system
Confirm tape width, core and adhesive type for the selected applicator.
Check the layout
Compare straight runs, curves and end clearances before starting.
Trial adhesion and removal
Test tape contact and removal on the actual substrate before a larger application.
Compare the options
Three Line-Marking and Tape-Application Tools
| Configuration | Dimensions and construction |
|---|---|
| Dual-tape push push-type marker | Product Structure: Push-applies two masking tape strips to define masking boundaries. Dimensions / mm: 740×320×200 requires measurement. |
| Arc TDJYH7D5M | Product Structure: Centering and steel cable organize arc tape application. Dimensions / mm: 510×510×80; assembled measurement basis requires verification. |
| Double-sided tape TDJSMJ | Product Structure: Manual application of installation tape. Dimensions / mm: 200 × 150 × 120. |
| Configuration | Application and value | Selection checks |
|---|---|---|
| Dual-tape push push-type marker | Two masking-tape boundaries for coated markings in workshops or aisles. Organizes two boundaries in one push operation with standing use. | Does not spray paint; verify spacing, material, and weight versions. |
| Arc TDJYH7D5M | Evaluate arc, rounded-corner, or circular coating boundaries. Provides a repeatable geometric starting point for arc positioning. | Cable length is not radius. Tape may wrinkle; weight and packaging records conflict. |
| Double-sided tape TDJSMJ | Double-sided tape installation or localized application permitted by the material system. Explicit 40–50 mm range; manual guidance and adhesion. | Does not replace masking or welding. Suitable tape width still requires matching core and release liner. |
Dual-tape push push-type marker
Dimensions and construction:
Product Structure: Push-applies two masking tape strips to define masking boundaries.
Dimensions / mm: 740×320×200 requires measurement.
Application and value:
Two masking-tape boundaries for coated markings in workshops or aisles. Organizes two boundaries in one push operation with standing use.
Selection checks:
Does not spray paint; verify spacing, material, and weight versions.
Arc TDJYH7D5M
Dimensions and construction:
Product Structure: Centering and steel cable organize arc tape application.
Dimensions / mm: 510×510×80; assembled measurement basis requires verification.
Application and value:
Evaluate arc, rounded-corner, or circular coating boundaries. Provides a repeatable geometric starting point for arc positioning.
Selection checks:
Cable length is not radius. Tape may wrinkle; weight and packaging records conflict.
Double-sided tape TDJSMJ
Dimensions and construction:
Product Structure: Manual application of installation tape.
Dimensions / mm: 200 × 150 × 120.
Application and value:
Double-sided tape installation or localized application permitted by the material system. Explicit 40–50 mm range; manual guidance and adhesion.
Selection checks:
Does not replace masking or welding. Suitable tape width still requires matching core and release liner.
Selection and use
| Step | What to check |
|---|---|
| Prepare the route | Check the intended line and the clean, dry substrate required by the tape. |
| Fit and check the tape | Confirm tape path, roll fit and guide contact. |
| Trial the application | Inspect alignment and adhesion, and test removal where the finish could be marked. |
Prepare the route:
Check the intended line and the clean, dry substrate required by the tape.
Fit and check the tape:
Confirm tape path, roll fit and guide contact.
Trial the application:
Inspect alignment and adhesion, and test removal where the finish could be marked.
Logo customization
The image shows the identified customization area for this product. Send the artwork and required quantity so the placement, marking method and final proof can be confirmed before production.
Frequently asked questions
Does it spray paint?
No. It is recorded as a dual-strip masking tape application tool.
Do two tape strips mean two painted lines?
No. They usually define masking boundaries. Determine the coating area from the actual layout.
What line width can it be adjusted to?
No explicit tape-spacing range is currently available; measure it.
Is 4.5 kg the machine net weight?
It is the recorded packaged gross weight. Net weight requires actual weighing.
