Beschreibung
PVC Strip Cutting for Flooring Installation
Prepare repeated strips from flexible PVC flooring with a consistent measuring reference. Select the detachable ruler for the reference length and working space your job needs.
| On-site task | Practical value |
|---|---|
| Repeated strip preparation | Use the ruler as a consistent measuring reference when setting up multiple strips of the same target size. Check a sample cut before repeating. |
| Different workstation sizes | Choose a 300, 500 or 1000mm ruler to suit the required measuring reference and available clearance. Support the sheet and any ruler overhang. |
| Packing between flooring jobs | Detach the body and ruler for transport and storage. Reassemble securely and reset the reference before the next job. |
Repeated strip preparation
Use the ruler as a consistent measuring reference when setting up multiple strips of the same target size. Check a sample cut before repeating.
Different workstation sizes
Choose a 300, 500 or 1000mm ruler to suit the required measuring reference and available clearance. Support the sheet and any ruler overhang.
Packing between flooring jobs
Detach the body and ruler for transport and storage. Reassemble securely and reset the reference before the next job.
SELECT YOUR CONFIGURATION
Specifications & Ruler Comparison
Choose a ruler that covers the measuring reference your job needs. All three versions use the same aluminium alloy body (460 × 115 × 90mm), with a detachable ruler for packing and storage.
| Compare | 300mm ruler | 500mm ruler | 1000mm ruler |
|---|---|---|---|
| Ruler reference | 300mm | 500mm | 1000mm |
| Best fit | Reference lengths up to 300mm | References over 300mm and up to 500mm | Longer references over 500mm and up to 1000mm |
| What you gain | A shorter ruler for compact setups | More reference length without using the longest ruler | The longest reference for larger strip layouts |
| Assembled size (L × W × H) | 420 × 460 × 90mm | 630 × 460 × 90mm | 1130 × 460 × 90mm |
| Space to allow | Check that the sheet and cutting path fit the work surface | Allow more side clearance than the 300mm version | Support the extended ruler and its overhang |
300mm ruler
Measuring reference:
300mm
Best fit:
Reference lengths up to 300mm
Practical benefit:
A shorter ruler for compact setups
Assembled size (L × W × H):
420 × 460 × 90mm
Space to allow:
Check that the sheet and cutting path fit the work surface
500mm ruler
Measuring reference:
500mm
Best fit:
References over 300mm and up to 500mm
Practical benefit:
More reference length without using the longest ruler
Assembled size (L × W × H):
630 × 460 × 90mm
Space to allow:
Allow more side clearance than the 300mm version
1000mm ruler
Measuring reference:
1000mm
Best fit:
Longer references over 500mm and up to 1000mm
Practical benefit:
The longest reference for larger strip layouts
Assembled size (L × W × H):
1130 × 460 × 90mm
Space to allow:
Support the extended ruler and its overhang
Set Up in Three Steps
01
Check & assemble
Check the body, ruler and blade, then secure the connection and establish the graduation reference.
02
Set the reference
Align the ruler zero point, blade position and sheet edge before setting the target dimension.
03
Test, then repeat
Make a sample cut in your material. Check strip dimensions at the start, middle and end before repeating.
BRANDING OPTIONS
Custom Logo Placement
The marked area on the tool body shows the proposed logo location. Use this image to indicate your preferred placement when requesting a quotation.
Share your logo artwork and required ruler configuration so the placement can be reviewed with your enquiry.
BEFORE YOU ENQUIRE
Häufig gestellte Fragen
How do I choose between the three ruler lengths?
Choose around the dimensional reference required for the job. The recorded graduation options are 300, 500 and 1000mm. Check that the complete assembly fits your work surface and that the material is supported.
Does a longer ruler increase cutting capacity?
A longer ruler extends the available measuring reference. It does not establish greater material-thickness capacity or cutting accuracy. Check the actual blade, material and setup with a sample cut.
Is the ruler detachable?
Yes. The recorded construction uses a detachable connection between the body and ruler. Check the connection and graduation reference when reassembling the tool.
What should I check before repeated strip cutting?
Check the blade condition, ruler zero point, blade position, material edge and connection. Make repeated sample strips from the intended material and compare dimensions at the start, middle and end.
Where can my logo be placed?
The supplied English placement image marks a proposed area on the tool body. Include your artwork and preferred placement with your enquiry so the configuration can be reviewed.
